Axial fan application:
Can be used for metallurgy, chemical industry, light industry, food, medicine and civil construction places such as ventilation or enhance heat dissipation. If the shell is removed, and can also be used free fan, but also in the exhaust pipe to the longer interval are arranged in series, in order to improve the air pressure in the pipeline.
Axial fan characteristic:
The fan has the advantages of simple structure, stable and reliable, small noise and wide range of function choices.
Axial fan maintenance and storage:
1, the use of the environment should always be kept clean, fan surface clean, inlet and outlet should not be debris, regular removal of fan and pipe dust and other debris.
2, only in the fan completely normal operating below, colleagues to ensure that the power supply facilities sufficient capacity, voltage stability, non phase operation power supply line must be as the special line, should not be long-term use of temporary power supply lines.
3, fan in the operation process found fan abnormal sound, motor serious fever, shell live, switch tripping, can not start, and so on, should immediately stop inspection. In order to ensure safety, it is not allowed to carry out maintenance during the operation of the fan. After commissioning, the test should be carried out for about five minutes, and no abnormal phenomenon will be confirmed.
4, according to the environmental conditions using irregularly to supplement or replace the bearing grease to ensure good lubrication fan in the operation process of the gas of not less than 1000 hours / times enclosed bearings and motor bearings, gas filling bearing with zl-3 lithium based grease 1/3, is running short of oil.
5, fans should be stored in a dry environment, to prevent the motor from moisture. There shall be defensive measures when the fan is stored in the open air. In the storage and transportation process should prevent fan bump, so as not to damage the fan.